Entry Assistance Trim

Entry Assistance Trim

• Removal and installation can be performed with the front seat installed.

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Press the handle - arrow B - forward as far as the stop and hold it in that position.

- Press the tab - arrow A - off the catch - arrow C - in the direction of the- arrow - using a trim removal wedge (3409).

- Perform the same step on the opposite side of the trim - 1 -.

- Tilt the trim - 1 - upward diagonally and remove from the handle with the bracket - 2 -.

- Disengage the rear trim catch from the handle with bracket.

- Remove the trim from the bracket with handle.

Installing

Install in reverse order of removal. Note the following:

- First engage the rear trim catch in the handle with bracket.

- Make sure the trim engages correctly in the handle with bracket.