Lumbar Support Curvature and Height Adjustment Motors

Lumbar Support Curvature And Height Adjustment Motors

Lumbar Support Height Adjustment Motor, Removing






- Remove backrest cover panel. Refer to => [ Backrest Cover ] Backrest Cover.

- Disconnect the connector - 1 -.

- Release the bracket - 2 - with a screwdriver - arrow -.

- Remove the lumbar support height adjustment motor - 3 -.

Installing

Install in reverse order of removal.

Lumbar Support Curvature Adjustment Motor, Removing and Installing

The lumbar support curvature adjustment motor is removed in a similar way as the lumbar support height adjustment motor.