Headrest Guide

Headrest Guide

Removing

- Remove the headrests. Refer to => [ Headrest ] Headrest.

- Remove the cover with upholstery from the backrest shell. Refer to:

• => [ Backrest Cover and Padding with Pass-Through ] Backrest Cover and Padding With Pass-Through.

• => [ Cover and Padding, Backrest with Cover or Storage Compartment ] Cover and Padding, Backrest With Cover or Storage Compartment.

- Fold the cover with upholstery - 1 - up until the headrest tubes - 2 - welded into the backrest shell - 3 - with the headrest guides - 4 - are visible.






- Press the retaining tab - arrow A - down until the headrest guide - 4 - is no longer locked.

- Pull headrest guide - 4 - upward out of headrest tube - 2 -.

Installing

Install in reverse order of removal. Note the following:

- Slide the headrest guide - 4 - into the headrest tube - 2 - until the retaining tab - arrow A - engages in the window - arrow B -.

- Before continuing the installation of the upholstery and cover, make sure both headrest tubes are engaged and cannot be pulled out.