Fuel Level Sensor Connector Assignment

Fuel Level Sensor Connector Assignment

- Disconnect 5-pin electrical harness connector at connector flange or fuel tank; procedure => 20 Fuel Level Sensor -G-, checking.

Terminal assignment of the 5-pin harness connector at Fuel Level Sensor (G)





1. Transfer fuel pump (G6) switched positive

2. Wire connection from fuel level sensor to instrument cluster (sensor mass) - pin 5

3. Wire connection from fuel level sensor to instrument cluster (fuel gauge) - pin 7

4. Wire connection from fuel level sensor to instrument cluster (fuel gauge) - pin 6

5. Transfer fuel pump ground

• On vehicles with FSI and TFSI engines, pins - 2, 3 and 4 - are looped through the fuel pump control module (J538).