Diagram 43/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface, ABS indicator lamp, ASR/ESP indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module

J533 - Data bus on board diagnostic interface

K47 - ABS indicator lamp Bosch 8.1 ABS/Electronic Stabilization Program Component Overview

K155 - ASR/ESP indicator lamp Bosch 8.1 ABS/Electronic Stabilization Program Component Overview

ST2 - Fuse panel 2

SD4 - Fuse 4 (on fuse panel D)

SD5 - Fuse 5 (on fuse panel D)

T20d - 20-pin connector Locations

T32f - 32-pin connector Instrument Cluster Control Module -J285-

T46s - 46-pin connector Overview Of Connector Stations

(135) - Ground connection 2 (in instrument panel wiring harness)

(687) - Ground connection 1 on center tunnel

(A1) - Positive connection (30a) (in instrument panel wiring harness)

* - Refer to applicable wiring diagram

*2 - Refer to applicable wiring diagram for fuse positions

*3 - From May 2009

*4 - Through April 2009

Previous Diagram 43/7 (Tracks 71-84)