Diagram 86/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Clutch oil temperature sensor, Transmission input speed sensor 3, Transmission control module, DSG transmission Mechatronic





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G509 - Clutch oil temperature sensor

G641 - Transmission input speed sensor 3

J217 - Transmission control module

J533 - Data bus on board diagnostic interface

J743 - DSG transmission Mechatronic

N433 - Sub-transmission 1 valve 1

N434 - Sub-transmission 1 valve 2

N437 - Sub-transmission 2 valve 1

N438 - Sub-transmission 2 valve 2

T14i - 14-pin connector

T16r - 16-pin connector

T17b - 17-pin connector Overview Of Connector Stations

T17r - 17-pin connector Overview Of Connector Stations

T20d - 20-pin connector

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B385) - Powertrain CAN bus high connection 3 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B392) - Powertrain CAN bus low connection 3 (in main wiring harness)

(D159) - High bus connection (in engine compartment wiring harness)

(D160) - Low bus positive connection (in engine compartment wiring harness)

Previous Diagram 86/3 (Tracks 15-28)

Next Diagram 86/5 (Tracks 43-56)