4-Cylinder Engine

EVAP Canister and Leak Detection System Hose Diagram






1 Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 (N80)

2 Vent Line

• From the fuel tank locking flange to the EVAP canister

• Clipped into brackets under the vehicle underbody

3 Fuel Tank Locking Flange

4 Air Filter

• For the leak detection pump (V144)

5 Connecting Line

• From the leak detection pump (V144) to the air filter

• Clipped into brackets under the vehicle underbody

6 EVAP Canister

• Installed location: Under the luggage compartment floor

• Removing and installing, refer to => [ EVAP Canister ] Service and Repair

7 Leak Detection Pump (V144)

• Installed location: On the EVAP canister under the bottom of the luggage compartment

• Check in Guided Fault Finding vehicle diagnostic tester

• Removing and installing, refer to => [ Leak Detection Pump (V144) ] Leak Detection Pump (V144)

8 Vent Line

• From the EVAP canister to EVAP canister purge regulator valve 1 (N80)

• Clipped into brackets under the vehicle underbody

9 Vacuum Line

• From the engine to the leak detection pump (V144)

• Clipped into brackets under the vehicle underbody