Cylinder Head Assembly: Specifications

Cylinder Head Bolts

Left





Replace the bolts
First step 40 Nm
Second step Tighten an additional 90°
Third step Tighten an additional 90°

Right





Replace the bolts
First step 40 Nm
Second step Tighten an additional 90°
Third step Tighten an additional 90°

Left (Continuation)





Replace the bolt
First step 40 Nm
Second step Tighten an additional 90°
Third step Tighten an additional 90°

Right (Continuation)





Replace the bolt
First step 40 Nm
Second step Tighten an additional 90°
Third step Tighten an additional 90°

Cylinder Head Distortion Inspection





Check the cylinder head for distortion with the straight edge and feeler gauge in several places

Maximum warpage 0.05 mm

Reworking Dimension, Cylinder Head





Resurfacing cylinder head (face grinding) is only permissible to minimum dimension - a -

Minimum dimension - a - 139.20 mm

Camshaft Guide Frame Bolts





Replace the bolts
First step Hand tight
Second step 8 Nm
Third step Tighten an additional 90°

Intake Manifold Fasteners Specifications

Exhaust Manifold Nuts Specifications

Camshaft Sprocket Bolts Specifications