Low Beam Headlamps

Low Beam Headlamps

Removing





- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Release spring clip - arrow - and remove low beam/daytime running lamp bulb housing cover - 1 - from headlamp housing.

- Remove the bulb - 2 - from the spring clips.





- Disconnect the electrical connector - 1 - on the bulb.

Installing

Install in reverse order of removal, observing the following:

- Press the bulb into the housing past the spring clips.

- Close the housing cover and secure it the spring clip.

- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.