Low Beam Bulb (M29)/(M31)

Low Beam Bulb (M29)/(M31)

Removing






- Turn off the ignition and remove the ignition key.

- Turn the light switch to "0" position.

- Remove the headlamp. Refer to => [ Headlamp ] Headlamp.

- Remove the low beam bulb cap - 1 - from the headlamp - arrow A -.

- Remove the bulb - 3 - from the spring clips - B arrows -.

- Disconnect the electrical connector - 2 - from the bulb.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the headlamp without touching the bulb with bare hands.

- Press the bulb into the headlamp past the spring clips.

- Connect the connector and close the housing cap.

- Install the headlamp. Refer to => [ Headlamp ] Headlamp.