Tire Pressure Monitoring Sensor Overview

Tire Pressure Monitoring Sensor Overview






1 Left Front Tire Pressure Monitoring Sensor (G222) , Right Front Tire Pressure Monitoring Sensor (G223) , Left Rear Tire Pressure Monitoring Sensor (G224) and Right Rear Tire Pressure Monitoring Sensor (G225)

• Replace the valve insert each time a tire is changed. Refer to the Electronic Parts Catalog (ETKA).

• When using used tire pressure sensors, replace the union nut, valve insert, seal, sealing washer and valve cap. Refer to the Electronic Parts Catalog (ETKA).

• After installing, visually check if the sensor is secure in its bed.

• Replace damaged sensors.

• Do not clean the sensors with steam blasting or strong compressed air.

• Removing and installing, refer to => [ Tire Pressure Sensor ] Service and Repair.

2 Valve Core

• Replace damaged valves.

• When changing a tire, replace the valve insert.

3 Sealing Washer

• When installing the new sealing washer, counterhold it to prevent the valve body from pushing through. If the connection breaks, then replace the tire pressure monitoring sensor.

4 Seal

• When installing the new seal, counterhold it to prevent the valve body from pushing through. If the connection breaks, then replace the tire pressure monitoring sensor.

5 Rim

• Tires, removing and mounting, refer to => [ Tires, Changing with Tire Pressure Monitoring System, Direct System ] Service and Repair.

6 Union Nut

• 8 Nm

7 Valve Cap

• Use only original valve caps from the repair set. Refer to the Electronic Parts Catalog (ETKA).

• Do not use comfort valve caps or metal caps.