Radiator Cooling Fan Control Module: Service and Repair

Coolant Fan Control Module

• The following description is based on a coolant fan with a separate Coolant Fan Control (FC) Control Module (J293).

Removing

- Remove front noise insulation - 1 -.





- Remove the coolant fan electrical connector - 1 - form the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release down.





- Free up the electrical wiring harness to the coolant fan control module.

- Disconnect electrical connectors - 2 - and - 3 -.





- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

• Tightening specifications. Refer to => [ Radiator and Coolant Fan Assembly Overview ] Radiator and Coolant Fan Assembly Overview.

Installation is in reverse order of removal, note the following:

- Install front noise insulation.