Electromechanical Power Steering Gear With Tie Rods Overview

Electromechanical Power Steering Gear with Tie Rods Overview






1 Electromechanical Steering Gear with Tie Rods

• With Power Steering Control Module (J500).

• Removing and installing, refer to => [ Steering Gear ] Steering Gear.

• Servicing, refer to => [ Electromechanical Power Steering Gear Overview ] Electromechanical Power Steering Gear Overview.

• Different versions, refer to the Electronic Parts Catalog (ETKA).

2 Bolt

• 80 Nm + 180° turn

• Always replace if removed.

3 Subframe

4 Nut

• Pushed into the subframe.

• Always replace if removed.

5 Steering Intermediate Shaft

6 Bolt

• 30 Nm + 90° turn

• Always replace if removed.

• The threaded hole for the bolt must always be cleaned (for example, using a thread tap).

7 Wheel Bearing Housing

8 Nut

• 100 Nm

• Always replace if removed.