Wiper System Overview

Wiper System Overview

Observe the notes on the contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.






1 Bolt

2 Windshield Wiper Motor (V)

• With the wiper motor control module (J400).

• Removing and installing, refer to => [ Wiper Motor with Wiper Motor Control Module ] Wiper Motor With Wiper Motor Control Module.

3 Bolt

4 Nut

• 17 Nm

5 Cap

6 Windshield Wiper Arm, Passenger's Side

• Different lengths, refer to the parts catalog.

• Removing and installing, refer to => [ Wiper Arms ] Wiper Arms.

• Adjusting, refer to => [ Wiper Arm, Adjusting ] Wiper Arm, Adjusting.

7 Windshield Wiper Blade, Passenger's Side

• Different lengths, refer to the parts catalog.

• Replacing, refer to => [ Wiper Blade, Replacing ] Wiper Blade, Replacing.

8 Windshield Wiper Blade, Driver's Side

• Different lengths, refer to the parts catalog.

• Replacing, refer to => [ Wiper Blade, Replacing ] Wiper Blade, Replacing.

9 Windshield Wiper Arm, Driver's Side

• Different lengths, refer to the parts catalog.

• Removing and installing, refer to => [ Wiper Arms ] Wiper Arms.

• Adjusting, refer to => [ Wiper Arm, Adjusting ] Wiper Arm, Adjusting.

10 Cap

11 Nut

• 17 Nm

12 Bolt

13 Water Drain Channel

Windshield Wiper Motor - Tightening Specification and Sequence






- Tighten the bolts - 1, 2, 3 - in sequence in 2 stages as follows:

- Tighten the bolts by hand until seated.

- Tighten the bolts to 8 Nm.