Mirror Housing
Mirror Housing
1 - Mirror housing
• Removal:
- Mirror glass removed
- Remove bolts - 4 - from cover trim - 3 - and remove them downward.
- Release housing from locking tabs on mirror adjusting unit and remove it upward.
• Installing
- Position mirror housing onto mirror adjusting unit - 2 - from above.
- While doing so, locking tabs - arrows - in mirror adjusting unit must engage above and below => [ Lower Mirror Locking Tab ].
2 - Mirror adjusting unit
3 - Lower trim strip.
4 - Combination screw
• 1 Nm
Lower Mirror Locking Tab
- When installing, locking tab (arrow - A -) of mirror adjusting unit - 2 - must be inserted into mirror housing catches - 1 - in direction of - arrow -.