Diagram 10/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance Regulation Control Module, Distance Regulation Sensor Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview of Relay Carrier

J428 - Distance Regulation Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

SB10 - Fuse 10 (on fuse panel) Overview of Fuses

T6 - 6-Pin Connector, diagnostic coupling automatic distance control

T17e - 17-Pin Connector, red, connector station A-pillar, left Overview of Connector Stations and Connectors

T26a - 26-Pin Connector, black, on data bus on board diagnostic interface

Z47 - Distance Regulation Sensor Heater

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections in Interior of Vehicle

(82) - Ground Connection 1 (in front left wiring harness)

(671) - Ground Connection 1 (on left front long member) Overview of Ground Connections in Front Part of Vehicle

(B163) - Plus Connection 1 (15) (in interior wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

(C45) - Plus Connection 1 (15) (in front wiring harness)

(C67) - CAN-Bus High Connection (in headlamp wiring harness)

(C68) - CAN-Bus Low Connection (in headlamp wiring harness)

- CAN-Bus (data wire)

* - Not applicable, phased-in from November 2004

# - 9-Pin relay carrier, behind driver's storage compartment

♦ - Through October 2005

♦♦ - From November 2005