Diagram 1/32 (Tracks 421-434)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Outside Air Temperature Sensor, Engine Coolant Level (ECL) Warning Switch, Windshield Washer Fluid Level Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G17 - Outside Air Temperature Sensor Components Outside Passenger Compartment

G33 - Windshield Washer Fluid Level Sensor

G106 - Outside Air Temperature Display Components Inside Passenger Compartment

J285 - Instrument Cluster Control Module Locations

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

K106 - Low windshield washer fluid level indicator lamp

T10q - 10-Pin Connector, black, near left headlamp

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T17b - 17-Pin Connector, black, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T17d - 17-Pin Connector, black, connector station A-pillar, left Overview of Connector Stations and Connectors

T32 - 32-Pin Connector, grey, on instrument cluster

(410) - Sensor Ground Connection 1 (in main wiring harness)

* - Output Sensor

Previous Diagram 1/31 (Tracks 407-420)

Next Diagram 1/33 (Tracks 435-448)