Roof Panel Trim

Roof Panel Trim





1 Roof Panel Trim

• Removing

- Unclip roof panel trim - 1 - with clamps - 4 - (quantity: 4).

- Push the roof panel trim panel - 1 - downward.

When unclipping, do not damage catches - 3 - on roof panel trim - 1 - under any circumstances.

- Remove roof end trim - 1 -.

• Installing

- Check clamps - 4 - (quantity: 4) for damage and deformity.

Replace damaged or deformed clamps.

- Before installing roof panel trim - 1 -, make sure clamps - 4 - are positioned correctly.

- Position placement of roof panel trim - 1 - with pins - 2 -.

- Clip roof panel trim - 1 - in with clamps - 4 - (quantity: 4) and catches - 3 -.

Ensure roof panel trim - 1 - is held securely.

2 Pins

• => [ (Item 1) Roof Panel Trim ]

• joined securely with roof panel trim - 1 -

3 Catches

• Refer to=> [ (Item 1) Roof Panel Trim ]

• Joined securely with roof panel trim - 1 -

4 Clamps

Quantity: 4

• Replace if damaged or deformed