Slotted Guide Rail Cowl Panel Trim

Slotted Guide Rail Cowl Panel Trim

Securing Segment





1 Sliding headliner guide spring

2 Guide spring disengaging guide

• To disengage, move slide back into securing segment

• Engaging guide spring:

- - A - Move slide back - 2 - into securing segment - 3 -.

- - B - Allow guide spring- 1 - to engage in - direction of arrow - in securing segment - 3 -.

- - C - Allow slide - 2 - to spring back, thereby engaging guide spring.

3 Securing segment

• To remove, pull sideways out of sunroof frame.

Installing Securing Segment





- Attach securing segment - 1 - to guide spring as shown and press securing segment into guide on sunroof frame.

- Catch in securing segment- arrow - must engage in groove on sunroof frame - arrow -.





- Tab- arrow - on spring guide- 2 -must engage under slide- arrow - on securing segment - 1 -





Removing Trim





- Tilt open sunroof.

- Slide sunroof headliner completely toward rear.

- Pull securing segment - 1 -sideways out of track.

- Pull off trim starting at bottom from frame and from glass sunroof panel - arrows -.





Installation





Installation is reverse of removal, noting the following:

- Press trim- 2 - into retainer on glass sunroof panel - 1 -.

- Slide trim from below on retaining strip - arrow -onto frame with sunroof operation.

- Sliding headliner- 3 -

• Make sure especially that trim is seated correctly in rear mounts on glass sunroof panel.