Rear Footwell Lighting

Standard Front Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Standard Front Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.



Headrests with Locking Mechanism

Removing





- Push release button - 2 - in - direction of arrow A - and pull headrest - 1 - upward as far as possible - arrow B -, keep release button pushed while doing so.

- Press release button - 2 - on headrest - 1 - until stop - arrow -.





- Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.

- Remove headrest completely from headrest guides.

Installing

To install, perform the steps used in removal in reverse order.

Rear Footwell Lighting

• Removing





- Press out rear footwell light - 1 - from rear.

- Remove connector - 2 -.

• Installing

To install, perform the steps used in removal in reverse order.