Diagram 68/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Accelerator Pedal Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E45 - Cruise Control Switch

G79 - Throttle Position (TP) Sensor Locations

G185 - Accelerator Pedal Position Sensor 2 Locations

G186 - Throttle Drive (for Electronic Power Control (EPC)

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)

J217 - Transmission Control Module (TCM) Overview of Control Modules

J338 - Throttle Valve Control Module 4.2L BVJ / BNK Overviews

J518 - Access/Start Control Module Overview of Control Modules

J527 - Steering Column Electronic Systems Control Module Locations

J623 - Engine Control Module (ECM) Overview of Control Modules

T16c - 16-Pin Connector, black, on transmission control module (TCM)

T17c - 17-Pin Connector, white, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T17o - 17-Pin Connector, brown, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T20h - 20-Pin Connector, black (Connector A), on access/start control module

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

(E26) - Connection (selector lever P/N) (in Motronic wiring harness)

* - Models with cruise control system

Previous Diagram 68/12 (Tracks 141-154)

Next Diagram 68/14 (Tracks 169-182)