Diagram 68/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Fuel Metering Valve, Intake Manifold Change-Over Valve, Oxygen Sensor (O2S) Heater 1 behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Overview of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 4.2L BVJ / BNK Overviews

N290 - Fuel Metering Valve 4.2L BVJ / BNK Overviews

N335 - Intake Manifold Change-Over Valve 4.2L BVJ / BNK Overviews

N402 - Fuel Metering Valve 2 4.2L BVJ / BNK Overviews

SA5 - Fuse 5 (on fuse panel A) Overview of Fuses

SA7 - Fuse 7 (on fuse panel A) Overview of Fuses

T4a - 4-Pin Connector, black, oxygen sensor (O2S) 1 behind three way catalytic converter (TWC)

T4b - 4-Pin Connector, brown, oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC)

(D113) - Connection 11 (in engine compartment wiring harness)

(E7) - Connection (87a) (in Motronic wiring harness)

Previous Diagram 68/14 (Tracks 169-182)

Next Diagram 68/16 (Tracks 197-210)