Diagram 68/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuel Pump (FP) Control Module, Instrument Cluster Control Module, Transfer Fuel Pump (FP), Fuel Level Sensor, Fuel Gauge, Fuel Level Sensor 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Locations

G1 - Fuel Gauge

G6 - Transfer Fuel Pump (FP) Locations

G169 - Fuel Level Sensor 2 Locations

J285 - Instrument Cluster Control Module Locations

J538 - Fuel Pump (FP) Control Module Locations

J623 - Engine Control Module (ECM) Overview of Control Modules

SC1 - Fuse 1 (on fuse panel C) Overview of Fuses

T5a - 5-Pin Connector, black, on fuel filler

T17o - 17-Pin Connector, brown, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T32 - 32-Pin Connector, grey, on instrument cluster

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

Y24 - Display Unit in Instrument Cluster

(51) - Ground Connection (in luggage compartment, right) Overview of Ground Connections in Interior of Vehicle

(371) - Ground Connection 6 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

* - Only for all-wheel drive

** - Output Sensor

Previous Diagram 68/20 (Tracks 253-266)

Next Diagram 68/22 (Tracks 281-294)