Diagram 68/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Left and Right Electrohydraulic Engine Mounting Regulator Valve, Secondary Air Injection (AIR) Pump Fuse, Leak Detection Pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary Air Injection (AIR) Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Overview of Control Modules

N144 - Left Electrohydraulic Engine Mounting Regulator Valve

N145 - Right Electrohydraulic Engine Mounting Regulator Valve

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

T17o - 17-Pin Connector, brown, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

V101 - Secondary Air Injection (AIR) Pump Motor 4.2L BVJ / BNK Overviews

V144 - Leak Detection Pump (LDP) Locations

(614) - Ground Connection 2 (in engine compartment, right) Overview of Ground Connections in Front Part of Vehicle

(E7) - Connection (87a) (in Motronic wiring harness)

- CAN-Bus (data wire)

* - Models with leak detection pump (LDP)

** - Relay carrier electronics box in right plenum chamber

# - from June 2007

Previous Diagram 68/15 (Tracks 183-196)

Next Diagram 68/17 (Tracks 211-224)