Roof Trim Molding

Roof Trim Molding

• To remove roof trim molding, it is not necessary to remove the side window.





1 - Roof trim molding

• Roof trim molding, side window may not be warped or bent, otherwise there is visual damage.

• Door seals in area of roof trim molding pulled off.

• Pry out cover strip - 2 - from roof trim molding.

• Drill off rivet heads of pop rivets - 3 -, strike rivet shafts through and remove roof trim molding.

2 - Cover strip

• To ease installation, coat edges with lubricant.

• Press into roof trim molding from front toward rear.

3 - Retaining clip

• 4 parts on roof frame

• 3 parts on side wall frames

4 - Side window trim molding

• Carefully remove sideways from clips with plastic wedge beginning at bottom and then pull out of roof trim.

5 - Pop rivet