Diagram 103/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Special Purpose Vehicle Control Module, Hazard Alarm Control Module, Revolving Light, Hazard Alarm Tone Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E250 - Hazard Alarm Tone Switch

J476 - Hazard Alarm Control Module

J608 - Special Purpose Vehicle Control Module

L5 - Revolving Light

SC2 - Fuse 2 (on fuse panel C) Overview of Fuses

T1m - Single Connector, on hazard alarm tone switch

T1n - Single Connector, on hazard alarm tone switch

T1o - Single Connector, on hazard alarm tone switch

T2ai - Double Connector, white, in left B-pillar

T2am - Double Connector, black, in luggage compartment, left

T3af - 3-Pin Connector, black, in center console

T33a - 33-Pin Connector, on hazard alarm control module

T88 - 88-Pin Connector, black, on special purpose vehicle control module

(X89) - Blue Light Connection 1 (in optional equipment wiring harness)

(X142) - Plus Connection 3 (30) (in optional equipment wiring harness)

Previous Diagram 103/8 (Tracks 85-98)

Next Diagram 103/10 (Tracks 113-126)