Diagram 5/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuel Pump (FP) Control Module, Instrument Cluster Control Module, Transfer Fuel Pump (FP), Fuel Level Sensor, Fuel Gauge, Fuel Level Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Locations

G1 - Fuel Gauge

G6 - Transfer Fuel Pump (FP) Locations

G169 - Fuel Level Sensor 2 Locations

J285 - Instrument Cluster Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

J538 - Fuel Pump (FP) Control Module Locations

SC1 - Fuse 1 (on fuse panel C) Overview of Fuses

T5a - 5-Pin Connector, black, on fuel filler

T26a - 26-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, grey, on instrument cluster

Y24 - Display Unit in Instrument Cluster

(51) - Ground Connection (in luggage compartment, right) Overview of Ground Connections in Interior of Vehicle

(371) - Ground Connection 6 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

- CAN-Bus (data wire)

* - Only for all-wheel drive

Previous Diagram 5/18 (Tracks 225-238)

Next Diagram 5/20 (Tracks 253-266)