Battery Monitoring Control Module

Battery Monitoring Control Module

Removing

- Switch off ignition and remove ignition key.

Sedan:

- Lift and secure luggage compartment floor mat.

Avant:

- Remove luggage compartment storage area floor - 1 - and cover for spare wheel - 2 -.





All:

- Release battery strap - 1 - if present.





• If the battery strap does not have a quick-release, then remove the screw on the strap.

- Release the strap - arrow B - and open the cover over the battery negative terminal - arrow A - - 1 -.





- Loosen the nut several turns and remove the ground wire terminal clamp - 1 - from the battery terminal.





- Disconnect the electrical connector - 2 -.

- Remove the nut - 5 - and ground cable - 4 - with the battery monitoring control module (J367) - item 3 -.

Installing

Install in reverse order of removal, observing the following:

- Connect battery => [ Vehicles with : ] Battery, Disconnecting and Connecting.

Tightening Specifications