Instrument Panel Vent

Instrument Panel

Instrument Panel Vent

Removing





- Turn knurled wheel - 3 - or air outlet vent completely upward.

- Insert one watchmaker's screwdriver each - 1 - into air vent retaining clamps above the lower ventilation fin - 2 -.

- Pull air vent alternating on left and right side out of the installation opening, watchmaker's screwdrivers must remain inserted while doing this.

• Pull air vent out of installation opening using Hook (3438) if necessary.

- Disconnect electrical harness connector at air vent.

Installing

Installation is reverse of removal.