Instrument Cluster Button In Cover

Instrument Panel Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Instrument Cluster Button in Cover

Removing

- Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.

- Switch off ignition and remove ignition key.

- Remove the left trim.

- Remove the trim with the right switch strip.

- Remove the vent in the instrument.

- Remove screws - arrows -.





• Use adhesive tape to affix cloth to protect steering column trim and steering arms.

- Unclip air vents from trim and unplug connectors at air vents.

- Disconnect electrical connectors on instrument cluster cover.

- Engage turn signal indicator switch in lower switch position.

- Activate "one-touch wiping" function and remove instrument cluster cover in this wiper switch position.

- Remove screws - arrows -.





- Detach buttons - 1 - and - 2 -.

Installing

Install in reverse order of removal, observing the following:

- Install the instrument panel vent.

- Install the trim with the right switch strip.

- Install the left trim.

Tightening Specifications