Slotted Guide Rail Zero Adjustment, Checking and Adjusting

Slotted Guide Rail Zero Adjustment, Checking and Adjusting

Glass Panel

- Tilt sunroof open.

- Pull off panel - 1 - from sunroof panel in direction of arrow, starting at front and working toward rear.

- Slide locking pin toward rear out of panel lock.





- Remove trim of panel downward.

- Pull off trim - 1 - from sunroof panel - 1 - completely toward vehicle interior and fold it downward and away.





- Zero position is correct when guide pin - 1 - is located between both markings - arrow - on link guide.





- If necessary, slide link guides by hand into this position on both sides with panel and motor removed.

• Install panel in zero position only.

Solar Panel

- For vehicles with solar panel - 1 -, open roof, pull headliner downward out of locking mechanism - arrow - and slide it into roof cutout toward rear.