Fender Flange Threaded Connection

Fender Flange Threaded Connection

CAUTION!
Observe safety precautions.

If welding or cutting with spark-producing devices/tools or when plating in foamed areas where hazardous gases are produced that are harmful to humans and the environment, these procedures are to be omitted in each case.





1 Fender flange

2 A-pillar

3 Wheel housing

4 Upper wheel housing longitudinal member

Special tools, testers and auxiliary items required

• Straight sander (VAS 5170)

Removing

Remove the bolts 1, 2, 3 and 4.

- Remove any remaining material with the straight sander (VAS 5170).









New Parts

• Fender mounting flange with reinforcement and welded nuts.

Installation

To install, perform the steps used for removal in reverse order.