Indirect Ventilation Trim

Indirect Ventilation Trim

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Remove Sunlight Photo Sensor (G107).

- Remove screw - arrow - in center of indirect ventilation trim.

- Remove the left and right A-pillar trim. Refer to => [ A-Pillar Trim, Upper Overview ] A-Pillar Trim, Upper Overview.






- Remove left and right spreader pin - 1 - on indirect ventilation trim.

- Remove indirect ventilation trim from instrument panel - arrow A - with (3409).

- Remove indirect ventilation trim by pulling back - arrow B -.

- Disconnect the connector on the speaker, if equipped.

Installing

Install in reverse order of removal.

• Tightening specifications, refer to => [ Instrument Panel Components Overview ] Instrument Panel Components Overview.