Backrest Adjustment Cable, Adjusting

Backrest Adjustment Cable, Adjusting

Special tools, testers and auxiliary items required

• Feeler gauge, commercially available (0.5 mm to 1 mm)

Make sure the backrest is locked (zero position) or it could tip forward accidentally.

- Install backrest adjustment lever cable - 1 -. Refer to => [ Backrest Adjustment Lever Cable ] Backrest Adjustment Lever Cable.






- Loosen clip - 4 - from adjustment nut - 2 -.

- Place a feeler gauge - 6 - 0.5 mm thick between stop - 5 - and backrest adjustment lever - 7 -.

- Then install adjustment nut - 2 - on screw - 3 - until control cable - 1 - is free of tension and there is slack in the cable.

- Check whether the backrest engages in the zero position again by releasing it several times.

- Then check play - a - which must be between 0.5 and 1 mm.