Seat Pan Overview

Seat Pan Overview

• The upper and lower seat pan frames of the front seat can be separated and replaced individually.

• When removing the seat pan, make sure the bushings in the bearing points (upper and lower frame threaded connection) are not damaged. These bushing cannot be replaced with workshop materials.






1 Screw, Self-Locking

• 28 Nm

• Quantity: 3

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter).

2 Upper Seat Pan Frame

• Removing and installing, refer to => [ Seat Pan, Power Front Seats ] Seat Pan, Power Front Seats.

3 Bushing

• Inserted in all bracket locations.

• Cannot be replaced with workshop materials.

• If the bushings are damaged, assembly part must be replaced.

4 Lower Seat Pan Frame

• Removing and installing, refer to => [ Seat Pan, Power Front Seats ] Seat Pan, Power Front Seats.

5 Bolt

• 28 Nm

• Replace

6 Nut

• Threaded holes for screws must always be cleaned (for example, with thread cutter).

7 Driver Seat Height Adjustment Motor (V245) or Front Passenger Seat Height Adjustment Motor (V246)

• Removing and installing, refer to => [ Seat Height Adjustment Motor (V245)/(V246) ] Seat Height Adjustment Motor (V245)/(V246).

8 Seat Forward/Back Adjustment Motor (V288)

• cannot be removed and installed with workshop materials.

• Stays on the lower seat pan frame => [ (Item 4) Lower Seat Pan Frame ].

9 Driver Seat Angle Adjustment Motor (V243) or Front Passenger Seat Angle Adjustment Motor (V244)

• Removing and installing, refer to => [ Seat Angle Adjustment Motors (V243)/(V244) ] Seat Angle Adjustment Motors (V243)/(V244).

10 Screw, Self-Locking

• 20 Nm

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter).