Diagram 47/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface, Instrument Cluster Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator (GEN)

J285 - Instrument Cluster Control Module Overview Of Control Modules

J367 - Battery Monitoring Control Module 4.2L Gasoline, BAR Overview

J428 - Distance Regulation Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

T2az - Double Connector, on battery monitoring control module

T8c - 8-Pin Connector, black, in engine compartment, front left

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

T32a - 32-Pin Connector, grey, on instrument cluster control module

T46a - 46-Pin Connector, black, left CAN separating connector

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B177) - Connection (61) (in interior wiring harness)

(B444) - On Board Diagnostic (OBD) Connection 1 (in main wiring harness) (Ringbreak Diagnosis)

• - CAN-Bus (data wire)

* - Models with distance regulation (ADC)

** - Wake Up Wire

# - Through May 2008

## - from June 2008

♦ - FOC - Fibre Optic Conductor => Wiring Diagram Infotainment-Data Bus (Most-Ring)

Previous Diagram 47/2 (Tracks 1-14)

Next Diagram 47/4 (Tracks 29-42)