Diagram 38/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module, Headlamp Range/Cornering Lamp Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G474 - Left Swivel Module Position Sensor

J343 - Left High-intensity Gas Discharge Lamp Control Module

J519 - Vehicle Electrical System Control Module Overview Of Control Modules

J745 - Headlamp Range/Cornering Lamp Control Module

L13 - Left High Intensity Gas Discharge (HID) Lamp

L174 - Left Daytime Running Lamp (DRL) Lamp

M1 - Left Parking Lamp

M5 - Left Front Turn Signal Lamp

N395 - Left Headlamp Reflector Adjustment Solenoid

T2s - Double Connector, black, on front left turn signal

T2t - Double Connector, black, on front left turn signal

T10a - 10-Pin Connector, black, on vehicle electrical system control module

T10o - 10-Pin Connector, black, in front right engine compartment

T12b - 12-Pin Connector, black, on vehicle electrical system control module

T14a - 14-Pin Connector, black, on left headlamp

T32b - 32-Pin Connector, grey, on vehicle electrical system control module

V48 - Left Headlamp Beam Adjustment Motor

V318 - Left Dynamic Cornering Light Motor

(368) - Ground Connection 3 (in main wiring harness)

(456) - Ground Connection 1 (in front bumper wiring harness)

(640) - Ground Connection (in engine compartment, left) Ground Locations

• - CAN-Bus (data wire)

* - Models with daytime running lights

Previous Diagram 38/4 (Tracks 29-42)

Next Diagram 38/6 (Tracks 57-70)