Diagram 1/32 (Tracks 421-434)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Overview Of Control Modules

J428 - Distance Regulation Control Module Locations

J523 - Front Information Display Control Head Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

T8c - 8-Pin Connector, black, in engine compartment, front left

T20k - 20-Pin Connector, red, Connector A, on front information display control head control module

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

T32a - 32-Pin Connector, grey, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B444) - On Board Diagnostic (OBD) Connection 1 (in main wiring harness) (Ringbreak Diagnosis)

• - CAN-Bus (data wire)

* - Models with automatic distance control (ADC)

Previous Diagram 1/31 (Tracks 407-420)

Next Diagram 1/33 (Tracks 435-448)