Diagram 1/34 (Tracks 449-462)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Switch, Windshield Washer Fluid Level Sensor, Engine Coolant Level (ECL) Sensor, Oil Pressure Warning Lamp, Outside Air Temperature Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G17 - Outside Air Temperature Sensor Components Outside Pass Compartment

G32 - Engine Coolant Level (ECL) Sensor

G33 - Windshield Washer Fluid Level Sensor

G106 - Outside Air Temperature Display Front A/C System Components in Pass Compartment - Left Side

J285 - Instrument Cluster Control Module Overview Of Control Modules

K3 - Oil Pressure Warning Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

T6d - 6-Pin Connector, black, in front right engine compartment

T10f - 10-Pin Connector, red, connector station electronics box plenum chamber

T10n - 10-Pin Connector, black, in front left engine compartment

T32a - 32-Pin Connector, grey, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(410) - Sensor Ground Connection 1 (in main wiring harness)

* - Output Sensor

# - Through May 2006

Previous Diagram 1/33 (Tracks 435-448)

Next Diagram 1/35 (Tracks 463-476)