Notes On "Comfort" Version Front A/C Control Head Climatronic Control Module J255

Notes on "Comfort" Version Front A/C Control Head Climatronic Control Module J255

- Display unit of temperature display of Climatronic Control Module J255 degree C or degree F is specified by the MMI (Multi Media Interface) via the Comfort CAN-Bus system and by the setting entered there. The setting can be modified via the MMI by entering via "Car", "Setup", "Setting".







- A/C control head Climatronic Control Module J255 "Comfort" version - A - is available in different versions (e.g. with or without seat heater button).
- On the A/C control head Climatronic Control Module J255 "Comfort" version - A -, both control knobs - D - can be pulled off and thereby be replaced individually.
- For a faulty measurement by Instrument Panel Interior Temperature Sensor G56 (installed only on front A/C control head Climatronic Control Module J255 "Comfort" version - A -), check intake grille - B - of trim panel for front A/C control head Climatronic Control Module J255, (it must not be closed) and function of Interior Temperature Sensor Fan V42.
- Front A/C control head Climatronic Control Module J255 "Comfort" version can be set into operation for a certain period of time (up to approx. 30 minutes) after switching off ignition by operating the "Econ, On/Off" button (the operating time is dependent on the battery charge state, it is approx. 10 minutes).