HID Headlamp Control Module (J343)/(J344)

HID Headlamp Control Module (J343)/(J344)

• Adjust the headlamps after performing any work that could have affected their adjustment, refer to => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Danger to life due to high voltage.

Removing






- Remove headlamp, refer to => [ Headlamps ] Headlamps.

- Release locking slide - 2 - in - direction of arrow - and remove housing cover - 1 - from headlamp housing.

- Remove screws - arrows - and remove high-intensity gas discharge lamp control module - 1 - from headlamp housing.






Installing

Install in reverse order of removal, observing the following:

- Check seal between High-intensity Gas Discharge Lamp Control Module and headlamp housing.

- Close the housing lid.

- Secure housing cover using locking slide.

- Install headlamp, refer to => [ Installing ] Headlamps.

- Adjust headlamps after installing, refer to => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Tightening Specifications