Inner Bulb Holder

Inner Bulb Holder

LED tail lamps have LED bulbs and are integrated in the tail lamps. The LEDs cannot be replaced; the entire tail lamp must be replaced.

Removing






- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Pry off cover cap - arrow - using a screwdriver.

- Turn socket - 1 - counterclockwise.

- Remove the bulb sockets from the tail lamp housing.

- Remove lamp from socket.

Installing

Install in reverse order of removal, observing the following:

- Insert new bulb into socket, do not touch glass cone with bare hands when doing so.

- Secure socket by turning clockwise.