Right Luggage Compartment Relay And Fuse Carrier

Right Luggage Compartment Relay and Fuse Carrier







Removing
- With ignition switched off, disconnect battery Ground (GND) wire.
- Remove luggage compartment right side trim.
- Remove relay or control modules, then unclip respective relay carrier.
- Release retaining clips - arrows - and press fuse holders - 1, 2, 4 - back out of relay and fuse carrier.
- Remove nuts - 3 - and - 5 - and remove relay and fuse carrier.







- Remove fuses from fuse holder.
- Release retaining clips - arrows - and remove cover from fuse holder.







- Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.

NOTE: Precise assignment of relay and fuse carrier can be seen from appropriate wiring diagram.

Installing
Install in reverse order of removal, observing the following:
- Install luggage compartment right side trim.
- Connect battery. Required actions.

Tightening torque

Component Nm
Relay and fuse carrier to body 3