Diagram 42/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Engine Coolant Temperature (ECT) Sensor (on Radiator), Brake Booster Pressure Sensor, Low Fuel Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) Locations

G294 - Brake Booster Pressure Sensor Antilock Brake System Component Overview

G410 - Low Fuel Pressure Sensor Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber

T60 - 60-Pin Connector, black, on engine control module (ECM)

T94 - 94-Pin Connector, black, on engine control module (ECM)

(327) - Sensor Ground Connection (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

* - Not applicable, phased-in from September 2006

Previous Diagram 42/9 (Tracks 99-112)

Next Diagram 42/11 (Tracks 127-140)