Diagram 42/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Camshaft Adjustment Valve 1, Fuel Metering Valve, Intake Manifold Runner Control (IMRC) Valve, Camshaft Adjustment Valve 1 (exhaust), Throttle Valve Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G186 - Throttle Drive (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

J338 - Throttle Valve Control Module Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N205 - Camshaft Adjustment Valve 1 Locations

N290 - Fuel Metering Valve Locations

N316 - Intake Manifold Runner Control (IMRC) Valve Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

N401 - Vacuum Booster Pump Valve 3.6L Gasoline, BHK Overview

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber

T60 - 60-Pin Connector, black, on engine control module (ECM)

(D116) - Connection 14 (in engine compartment wiring harness)

(D117) - Connection 15 (in engine compartment wiring harness)

* - Not applicable, phased-in from September 2006

# - Through May 2006

## - from June 2006

Previous Diagram 42/10 (Tracks 113-126)

Next Diagram 42/12 (Tracks 141-154)