Diagram 42/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Brake Booster Relay, Leak Detection Pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J393 - Comfort System Central Control Module Overview Of Control Modules

J569 - Brake Booster Relay Overview Of Relay

J623 - Engine Control Module (ECM) Overview Of Control Modules

S13 - Fuse (on fuse/relay panel) Locations

S18 - Fuse (on fuse/relay panel) Locations

T6k - 6-Pin Connector, brown, connector station electronics box plenum chamber

T10e - 10-Pin Connector, green, connector station electronics box plenum chamber

T10g - 10-Pin Connector, black, on comfort system central control module

T94 - 94-Pin Connector, black, on engine control module (ECM)

V144 - Leak Detection Pump (LDP) Locations

V192 - Brake System Vacuum Pump Antilock Brake System Component Overview

(685) - Ground Connection 1 (on right front long member) Ground Locations

(D112) - Connection 10 (in engine compartment wiring harness)

(D113) - Connection 11 (in engine compartment wiring harness)

* - Models with leak detection pump (LDP)

** - Models with automatic transmission

*** - Not applicable, phased-in from September 2006

# - Through May 2006

## - from June 2006

♦ - Relay and fuse carrier electronics box plenum chamber

Previous Diagram 42/14 (Tracks 169-182)

Next Diagram 42/16 (Tracks 197-210)