Operation CHARM: Car repair manuals for everyone.

Diagram 42/18 (Tracks 225-238)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Coolant Fan Control (FC) Control Module, Coolant Fan Control (FC) Control Module 2, High Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G65 - High Pressure Sensor Components Outside Pass Compartment

J255 - Climatronic Control Module Overview Of Control Modules

J293 - Coolant Fan Control (FC) Control Module Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

J671 - Coolant Fan Control (FC) Control Module 2 Locations

S1 - Fuse (on fuse/relay panel)

S4 - Fuse (on fuse/relay panel) Locations

S8 - Fuse (on fuse/relay panel) Locations

S16 - Fuse (on fuse/relay panel) Locations

T2k - Double Connector, black, under cover of vehicle floor

T5k - 5-Pin Connector, black, under left cover of rear vehicle floor

T6k - 6-Pin Connector, brown, connector station electronics box plenum chamber

T10d - 10-Pin Connector, blue, connector station electronics box plenum chamber

T16d - 16-Pin Connector, black (Connector D), on Climatronic control module

T94 - 94-Pin Connector, black, on engine control module (ECM)

V7 - Coolant Fan Locations

V177 - Coolant Fan 2 Locations

(671) - Ground Connection 1 (on left front long member) Ground Locations

* - Only tank prewiring

# - Through May 2006

## - from June 2006

- Through May 2007

♦♦ - from June 2007

Previous Diagram 42/17 (Tracks 211-224)

Next Diagram 42/19 (Tracks 239-252)