Fuel Pump (FP) Control Module (J538), Vehicles Through 10.2006

Fuel Pump (FP) Control Module (J538), Vehicles through 10.2006

Removing






• FP control module is located at the front of fuel tank below exhaust system and driveshaft.

- Turn the ignition and remove the ignition key.

Danger of getting burned.

• Allow exhaust system to cool.

- Remove the bolts - 1 and 3 -.

- Disengage the FP control module at bracket - arrows -.

- Disconnect electrical connector - 2 -.

Installing

• Tightening specification, refer to => [ Fuel Tank with Attachments Overview ] Fuel Tank With Attachments Overview.

Install in reverse order of removal.