Base Mount With Left Instrument Panel Fuse Panel

Base Mount with Left Instrument Panel Fuse Panel

Removing






- Remove driver's side upper instrument panel cover.

- If present, remove driver's side left knee bar.

- Pry off left cover from instrument panel using a screwdriver - arrow -.

- If present, remove screw - 1 - and remove air duct - 2 -.






- Release the retaining clips - arrows - and press the fuse panels - 2 through 4 - back and out of the base plate.






- Remove screws - 1 - and - 7 - and remove base mount back from instrument panel central tube.

- Release fuse - 5 - and retaining spring and press left CAN connector (T46a) - item 6 - back out of base mount.

Installing

Install in reverse order of removal, observing the following:

- If present, install driver's side left knee bar.

- Install driver's side upper instrument panel cover.

Tightening Specifications