Rear Window Spray Nozzle, Adjusting

Rear Window Spray Nozzle, Adjusting

Special tools, testers and auxiliary items required

• Windshield Washer Aiming Tool (T40187) equipped with Replacement Tip (3125/5A)

Procedure






Risk of injury.

• If the (T40187) is not used, ensure that both sides are always covered and secured by covers - 3 - and - 4 -.

• If one side is not secured by the cover, injury can be caused by the (3125/5A) - 1 - or adjusting pin - 2 -.

• When opening each side, always ensure that the other side is not pointing toward the hand.

- Unlock the short cover - 1 - on the (T40187) - arrow A - and push it back - arrow B -.






- Adjust the spray nozzles with the windshield washer aiming tool (T40187) the fluid is sprayed onto the places shown on the rear window.






• Dimension - a - = 100 mm

• Dimension - b - = 10 mm

• Dimension - c - = 275 mm